VM Aluminum Rear Wheels 12 x12 (6+6 Offset)
Priced & sold as pairs. Short Chrome Valve Stems included.
Polished Aluminum 12x12 Wheels (6+6 Offset)
Short Chrome Valve stems included
Sold in pairs.
These VM (6+6) wheels weigh about 8 pounds each.
This CNC spun aluminum wheel begins with a 4mm (0.156") thickness. The inside is a large diameter smooth i.d. and the outside section is a deep lip with a large diameter opening with a chamfered outer edge to the bead. They are combined with a center plate and pressure tested for leaks at the weld.
This (6+6) offset wheel WILL accomodate stock cub-cadet external axle brakes.
The bolt pattern is (5) 0.505" diameter bolt holes on a 4.5" diameter bolt circle. There is a 2.75" diameter hole through the center of the wheel inside the bolt pattern.
This is the stock cub-cadet bolt pattern as well as many Ford vehicles.
Heavy-duty bead locks.
If loosing clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.
|Engine Make & Model||N/A|