VMTT23 Tires on VM Wheels
Priced individually, sold as pairs. Must add 2 to cart. Valve stems included.
Priced and sold as pairs. Valve stems included.
* 10.50" x 12" x 23"
* 26 Staggered Bars
* 45 Degree Bar Angles
* 0.600" Depth of Lug
* Very Traditional Bar Type Tire
* VM TT's do not require hardening (70-75 Shore A scale durometer out-of-the box)
* Abrasive resistant compound for long wear characteristics
* Strong beads that hold air
* Can be shipped via UPS, or picked up on location
* 10 pair, group-buy discounts available
Short Chrome Valve stems included
This CNC spun aluminum wheel begins with a 4mm (0.156") thickness. The inside and outside sections are combined with a center plate and pressure tested for leaks at the weld.
(4+6) , (6+6) & (4+8) wheel offsets DO accommodate stock cub-cadet external axle brakes.
(5+5) wheel offsets DO NOT accomodate stock cub-cadet external axle brakes.
The bolt pattern is (5) 0.505" diameter bolt holes on a 4.5" diameter bolt circle. There is a 2.75" diameter hole through the center of the wheel inside the bolt pattern.
This is the stock cub-cadet bolt pattern as well as many Ford vehicles.
Heavy-duty bead locks.
Our wheel will mount one inch per side closer to the tractor frame than would a (3+7) offset.
If loosing an inch or more of clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances
|Engine Make & Model||Kohler K341|