VM Aluminum Rear Wheels 12 x 10 (4+6 Offset)

Polished Aluminum 12 x10 Wheels (4+6 Offset)

Short Chrome Valve stems included

Sold in pairs.

This CNC spun aluminum wheel begins with a 4mm (0.156″) thickness. The inside and outside sections are combined with a center plate and pressure tested for leaks at the weld.

This (4+6) offset wheel DOES accommodate stock cub-cadet external axle brakes.

The bolt pattern is (5) 0.505″ diameter bolt holes (use 7/16″ bolts) on a 4.5″ diameter bolt circle. There is a 2.75″ diameter hole through the center of the wheel inside the bolt pattern.
This is the stock cub-cadet bolt pattern as well as many Ford vehicles.

Heavy-duty bead locks.

Our wheel will mount one inch per side closer to the tractor frame than would a (3+7) offset.
If loosing an inch or more of clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.