VM Aluminum Rear Wheels 12 x10 (5+5 Offset)

Polished Aluminum 12×10 Wheels (5+5 Offset)

Short Chrome Valve stems included

Sold in pairs.

This CNC spun aluminum wheel begins with a 4mm (0.156″) thickness. The inside and outside sections are identical. They are combined with a center plate and pressure tested for leaks at the weld.

This (5+5) offset wheel will NOT accomodate stock cub-cadet external axle brakes.

The bolt pattern is (5) 0.505″ diameter bolt holes on a 4.5″ diameter bolt circle. There is a 2.75″ diameter hole through the center of the wheel inside the bolt pattern.
This is the stock cub-cadet bolt pattern as well as many Ford vehicles.

Heavy-duty bead locks.

With many of the stock wheels not being a symetrical offset as in the case our our (5+5) wheel, our wheel will mount one inch per side closer to the tractor frame than would a (4+8) offset, or two inches per side closer than a (3+7) offset wheel.
If loosing an inch or more of clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.