VM11 Tires Mounted on 12″ VM Wheels

VM11 tires mounted on 12″ Polished VM Wheels
Priced individually, sold in pairs.

Tire Features:

• * 12″ x 12″ x 26″
• * 27 full chevron lugs
• * .068″ depth of lug
• * Vertical lug face
• * Wide lug face
• *Rollout Circumference: 84-86″
• * Do not require hardening (70-75 Shore A scale durometer out-of-the box)
• * Symmetrical 20 deg chevron lug angle
• * Will perform “out-of-the box” and not require cutting
• * Abrasive resistant compound for long wear characteristics
• * SUPER active sidewalls 
• * Strong beads that hold air
• * All tires have been mounted to rims, inflated to 7 psi, measured, labeled, and demounted for circumference matched set.
• *Same geometry as RIOT tires but with bias construction

Polished Aluminum Wheel Features: 

• *Short Chrome Valve stems included
• *Weigh about 8 pounds each.
• *CNC spun aluminum
• *4mm (0.156″) thickness
• *Pressure tested for leaks at the weld.
• *Heavy-duty bead locks.
• *(6+6) offset wheel WILL accomodate stock cub-cadet external axle brakes.
• *The bolt pattern is (5) 0.505″ diameter bolt holes on a 4.5″ diameter bolt circle. There is a 2.75″ diameter hole through the center of the wheel inside the bolt pattern. This is the stock cub-cadet bolt pattern as well as many Ford vehicles.
• 
  

If loosing clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.