In Stock
SKU
4-GBUCCopen
Single Cylinder Cast Camshaft (Open RPM) – V432-6
- Lobes built up with a hard face overlay before grind
- 0.432″ Lift
- Duration rated at 261 degrees at 0.050″ tappet lift
- Revs to 7500 & produces a lot of torque
- Requires larger than factory lifters (1.280″)
- Buy off the shelf or mail in your core
Price range: $315.00 through $390.00
Details
The V432-6 profile is a great option when you are allowed open lift. Example: 10 H.P. Open Class.
- Revs to 7500 and produces a lot of torque.
- 0.432″ Lift
- Duration rated at 261 degrees at 0.050″ tappet lift
- Ground on 106 degrees of lobe center separation
- Profile must have larger lifters such as the 1.280″ or 1.400″
- Requires an aftermarket heavier single spring assembly
- Our single spring and retainer assembly works well with this cam
We will build up the lobes with a hard face overlay and regrind your cam core.
Verify the quality of the ignition points lobe before sending in your core. Excessive wear will result in an insufficient ignition signal. Inspect the gear teeth for damage. Look for cracks near the base of the gear before sending the core. DO NOT remove the compression release.
You will receive the cam you sent in. Camshaft is returned after full payment has been made.
Due to demand, grind services currently have a turnaround time of about 2 weeks after receiving your core. Thank you for your understanding.
