Small Air Filter and Adaptor Ring Combo
Small Air Filter and Adaptor Ring Combo - Image 2
Small Air Filter and Adaptor Ring Combo - Image 3
In Stock
SKU 7-6X3.8"LSCAF-BLUE 7-FAD

Small Air Filter and Adaptor Ring Combo

FEATURES

  • High tensile strength ductile iron material 
  • Critical gasket, seal, bearing surfaces and bolt holes established (cylinder head, oil pan, cam cover, valve cover, etc)
  • Stock K341 deck height (Pro Stock spec)
  • Stock K341 head bolt pattern (Pro Stock spec)
  • Stock K341 camshaft position (Pro Stock spec)
  • 5/8″ Lifter bores with bronze bushings installed at correct angles
  • Valve guide positions established at correct angles 
  • Pre-drilled for pressurized oil system ports
  • Internal clearance for the largest lifters and highest lift cams
  • Internal clearance for the connecting rod at the bore base
  • 3.970″ Rough bore over the crankshaft centerline
  • Valve angles/positions as well as the head bolt patterns are optimized for pro stock
  • Accepts stock points ignition

 

What you need todo

  • Cut intake/exhaust port to the valve
  • Drill and tap intake and exhaust manifold bolt patterns
  • Install valve guides
  • Cut valve job
  • Bore and Hone

$65.99

5 in stock

Details

Clamp-On Air Filter
– 6″ O.D. x 3.8″ Long
– Pre-oiled cotton fiber ready to use
– Permanent dye filter color will not fade
– Included filter base adapter rings allow use of this filter on 3″, 3.5″ and 4″ intake tubes
– Compatible with VM’s Filter Adaptor Ring, 1.000″ Stock Altered Carb & 1.200″ Pro Stock Carb.

Machined Aluminum Velocity Stack
– Bolts onto Kohler Carburetors.
– Two Bolts are included.
– The listed Clamp-On Air Filters clamp onto the specially grooved flange on the Velocity Stack.