Desc

7 Items

View as Grid List
per page
  1. V-Twin Cast Camshaft
    $291.20
    V-Twin Cast Camshaft

    We offer grinding services for the V-Twin engines such as: Kohler, Briggs, Kawasaki, Onan and Generac. We have flat tappet profiles for different applications as listed. Other profiles are also available.

    Learn More
  2. Single Cylinder Cast Camshaft: Stock Altered Grinds - 6,500 + Range
    $213.20
    Single Cylinder Cast Camshaft: Stock Altered Grinds - 6,500 + Range
    Single Cylinder Cast Camshaft: Stock Altered Grinds. This camshaft is rated for open RPM. All grinds have 340 lift, but a variety of durations are available. Most of these profiles will work well with stock lifters. Learn More
  3. Single Cylinder Cast Camshaft: Stock Class Grinds - Open RPM
    $213.20
    Single Cylinder Cast Camshaft: Stock Class Grinds - Open RPM
    V375-CH-4K-100 Stock Class Open RPM Grind. Rated for OPEN RPM. This grind has .324" factory lift and a duration of 238 degrees at 0.050" tappet lift, but has been ground slightly retarded to perform at its peak at a higher RPM range than 4,500. V340-248/340-244-5 Stock Class Unlimited RPM Grind. Rated for UNLIMITED RPM. It can be used when you are allowed .330 lift at the valve. This profile has 248 degrees duration @ .050 tappet lift on the intake and 244 degrees duration @ .050 tappet lift on the exhaust. Learn More
  4. Single Cylinder Cast Camshaft: Stock Class Grind - 4,000 RPM Range
    $213.20
    Single Cylinder Cast Camshaft: Stock Class Grind - 4,000 RPM Range

    V338-245/338-238-3 Stock Class Camshaft Grind: Perfect for 3600-4250 rpm stock classes. (10, 12, 14, 16hp engines). With 0.008" lash gives you 0.330" valve lift.. Intake has 245 deg of duration @ 0.050" lift. Exhaust has 238 deg of duration @ 0.050" lift. Asymmetrical profile with high opening rates and slower closing ramps. super smooth cnc generated masters). 22 degs of dwell at full open. More area under the curve than any of the competitor's profiles! Runs with stock Kohler tappets but 1.280" tappet is recommended.

    Learn More
Desc

7 Items

View as Grid List
per page

website by Imagine This! Marketing Group

To Top
Cam Grinding