Search results for: 'Carbureter bolts' | Vogel Manufacturing

Aluminum Wheel Spacers w/ 5 x 4.5 bolt pattern. Sold as pair

Features extra material at of the thru-bolt hole end to eliminate common weakness & breakage issues as well as having a finer tooth finish than you'll find on factory parts.

Priced and Sold Individually.

• Made from A356 heat treated to T6 - and can be welded.
• Head is decked. 
• You complete the valve pocket & spark plug location.
• Drilled with standard 10 bolt pattern used in 16 HP blocks.
• Ideal for the stock altered class and classes that require a factory look-alike head.   

Sold in pairs. Select by size & color.

Priced & sold as pairs. Short Chrome Valve Stems included.

FEATURES

• High tensile strength ductile iron material 
• Critical gasket, seal, bearing surfaces and bolt holes established (cylinder head, oil pan, cam cover, valve cover, etc)
• Stock K341 deck height (Pro Stock spec)
• Stock K341 head bolt pattern (Pro Stock spec)
• Stock K341 camshaft position (Pro Stock spec)
• 5/8" Lifter bores with bronze bushings installed at correct angles
• Valve guide positions established at correct angles 
• Pre-drilled for pressurized oil system ports
• Internal clearance for the largest lifters and highest lift cams
• Internal clearance for the connecting rod at the bore base
• 3.970" Rough bore over the crankshaft centerline
• Valve angles/positions as well as the head bolt patterns are optimized for pro stock
• Accepts stock points ignition

What you need todo

• Cut intake/exhaust port to the valve
• Drill and tap intake and exhaust manifold bolt patterns
• Install valve guides
• Cut valve job
• Bore and Hone