In stock
SKU
3-SLEEVEBLANK
Sleeve Blank
Custom designed sleeve to install in Aftermarket Blocks.
Custom designed cast iron sleeve to install in Aftermarket Blocks.
The Stock/ Stock Altered/ Sport Stock Sleeve goes in with an O.D. of 3.968", an I.D. of 3.375", and an OAL of 6.125".
The sleeve could be used in blocks with finished bores from 3.378" through 3.812''.
The Pro Stock/ Super Stock Sleeve goes in with an O.D. of 4.375", an I.D. of 4.062" and an OAL of 6.750"
These diameters typically allow for sufficent room to move the bore.
After installing the sleeve, you can then deck and re-bore the sleeve for final diameter before honing.
The Stock/ Stock Altered/ Sport Stock Sleeve goes in with an O.D. of 3.968", an I.D. of 3.375", and an OAL of 6.125".
The sleeve could be used in blocks with finished bores from 3.378" through 3.812''.
The Pro Stock/ Super Stock Sleeve goes in with an O.D. of 4.375", an I.D. of 4.062" and an OAL of 6.750"
These diameters typically allow for sufficent room to move the bore.
After installing the sleeve, you can then deck and re-bore the sleeve for final diameter before honing.