VM09 tires mounted on 12" VM Wheels

VM09 tires mounted on 12" polished VM Wheels

If loosing clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.

Must add 2 to cart. Priced individually - sold in pairs. Valve stems included.

The VM09 provides the most aggressive out-of-the-box tire ever produced for graden tractor pulling. The 09 eliminates the need to cut deep lug tires for softer tracks.

Tire Features:

• * 12" x 12" x 26"
• * 28 full chevron lugs
• * Full 3/4" depth of lug
• * Vertical lug face
• * Wide lug face
• *Rollout Circumference: 85-86.25"
• * VM09's do not require hardening (70-75 Shore A scale durometer out-of-the box)
• * Symmetrical 17.5 deg chevron lug angle
• * Will perform "out-of-the box" and not require cutting
• * Abrasive resistant compound for long wear characteristics
• * Flexible sidewalls with a softer compound
• * Strong beads that hold air
• * All tires have been mounted to rims, inflated to 7 psi, measured, labeled, and demounted for circumference matched set.

Aluminum Wheel Features: 

• *Short Chrome Valve stems included
• *Weigh about 8 pounds each.
• *CNC spun aluminum
• *4mm (0.156") thickness
• *Pressure tested for leaks at the weld.
• *Heavy-duty bead locks.
• *(6+6) offset wheel WILL accomodate stock cub-cadet external axle brakes.
• *The bolt pattern is (5) 0.505" diameter bolt holes on a 4.5" diameter bolt circle. There is a 2.75" diameter hole through the center of the wheel inside the bolt pattern. This is the stock cub-cadet bolt pattern as well as many Ford vehicles.

If loosing clearance creates a problem, you would need run the appropriate spacers on the axle to widen the wheelbase back to acceptable clearances.