Search results for: 'Jones block' | Vogel Manufacturing
-
$1,675.00Small Block John Deere Billet CamshaftSmall Block John Deere Billet Camshaft. Call 217-342-6949 or email [email protected] for grinds available as well as recommendations for your project. Learn MoreOut of stock -
-
$1,400.00Pro Stock BlockFEATURES
- High tensile strength ductile iron material
- Critical gasket, seal, bearing surfaces and bolt holes established (cylinder head, oil pan, cam cover, valve cover, etc)
- Stock K341 deck height (Pro Stock spec)
- Stock K341 head bolt pattern (Pro Stock spec)
- Stock K341 camshaft position (Pro Stock spec)
- 5/8" Lifter bores with bronze bushings installed at correct angles
- Valve guide positions established at correct angles
- Pre-drilled for pressurized oil system ports
- Internal clearance for the largest lifters and highest lift cams
- Internal clearance for the connecting rod at the bore base
- 3.970" Rough bore over the crankshaft centerline
- Valve angles/positions as well as the head bolt patterns are optimized for pro stock
- Accepts stock points ignition
What you need todo
- Cut intake/exhaust port to the valve
- Drill and tap intake and exhaust manifold bolt patterns
- Install valve guides
- Cut valve job
- Bore and Hone
-
-
-
-
$150.00Billet Aluminum Oil Pan for Kohler Blocks- Same thickness as stock (1.062")
- High quality steel thread inserts
- Magnetic drain plug included
- Install with 4 hardened washers included
Out of stock -
Sleeve BlankStarting at $140.40
Custom designed sleeve to install in Aftermarket Blocks. Learn More -
$150.00Thick Cast Factory Replacement 10-12-14 HP Cylinder Head Blank- Made from A356 heat treated to T6 - and can be welded.
- Head is decked.
- You complete the valve pocket & spark plug location.
- Drilled with standard 9 bolt pattern used in 10 HP, 12 HP, and 14 HP blocks.
- Ideal for the stock altered class and classes that require a factory look-alike head.
- Engine application: K241, K301, K321, K341
